
Claroline Connect est un LMS (Learning management system) Open Source sous licence GPLv3 permettant de créer et d’administrer des formations et des espaces de collaboration en ligne. Il est écrit en PHP et développé par le Centre de Recherche et de Développement de l’ECAM et l’Université Catholique de Louvain. La dernière version fonctionnelle via l’archive est la 7.0.0 (ou 16.05, ancienne numérotation), compatible avec PHP ≤ 7.1. Nous installerons ici la dernière version en développement via Composer / PHP CLI, la 12.4 (nouvelle numérotation), compatible avec PHP ≥ 7.1. Elle est donc compatible avec Debian 10 Buster où PHP est installé en version 7.3 par défaut.
Alternatives Open Source à Claroline Connect :
CE COURS EST DISPONIBLE EN VIDÉO
(VERSION DÉTAILLÉE ET PLUS COMPLÈTE)
Version Française
Comment installer un LMS Open Source – Part 1
Comment installer un LMS Open Source – Part 2
Version Anglaise
How to install an Open Source LMS – Part 1
How to install an Open Source LMS – Part 2
OBJECTIF
L’objectif de cet article est l’installation et la configuration d’un serveur LAMP7 (Linux Apache 2.4 MariaDB 10.3 PHP 7.3) auto-hébergé Claroline en version 12.4 sur une distribution Linux Debian Buster 10.2 64bits (LAMP 1/4).
SCHEMA LOGIQUE
PRÉREQUIS
1. Prérequis avant réalisation
- Un serveur Debian Buster 10.2 64 bits fonctionnel (installation basique avec utilitaires usuels du système et service SSH)
- Packages de base supplémentaires : sudo, dnsutils, git, resolvconf, terminator, tree
- Domaine utilisé : opensharing.priv
2. Configuration réseau initiale
Serveur Claroline | |
FQDN | mylms.opensharing.priv |
Adresse IP | 192.168.1.10 |
Réseau | 192.168.1.0/24 |
Passerelle | 192.168.1.1 |
dns-nameservers | 8.8.8.8 8.8.4.4 |
dns-search | opensharing.priv |
Contenu initial du fichier /etc/network/interfaces :
sudo nano /etc/network/interfaces
auto lo iface lo inet loopback allow-hotplug enp0s3 iface enp0s3 inet static address 192.168.1.10 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-search opensharing.priv dns-nameservers 8.8.8.8 8.8.4.4
Contenu initial du fichier /etc/hosts :
sudo nano /etc/hosts
127.0.0.1 localhost.localdomain localhost 192.168.1.10 mylms.opensharing.priv mylms
Rmq : L’adresse 127.0.1.1 doit être retirée sur un serveur à IP fixe et remplacée par cette dernière, tel que l’exemple ci-dessus.
Contenu initial du fichier /etc/host.conf :
sudo nano /etc/host.conf
order hosts, bind multi on
Contenu initial du fichier /etc/resolv.conf (généré automatiquement) :
cat /etc/resolv.conf
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 8.8.8.8 nameserver 8.8.4.4 search opensharing.priv
Rmq : Le fichier /etc/resolv.conf ne doit pas être édité dès lors que le paquet resolvconf a été installé.
Pour prendre en compte les modifications des fichiers de configuration relatifs au réseau, redémarrage du service réseau et de l’interface réseau configurée en IP fixe :
sudo systemctl restart networking sudo ifup enp0s3
Vérification de la bonne configuration réseau :
ping 8.8.8.8 dig opensharing.fr
RÉALISATION
1. Installation de Apache (LAMP 2/4)
sudo apt-get update sudo apt-get upgrade
apt-get install apache2 apache2-doc
2. Configuration de Apache (LAMP2/4)
Création d’une configuration minimale pour notre LMS
sudo nano /etc/apache2/sites-available/mylms.conf
<VirtualHost *:80> DocumentRoot /var/www/mylmshttps://getcomposer.org/installer | sudo php -- --install-dir=/usr/local/bin --filename=composer
All settings correct for using Composer Downloading... Composer (version 1.9.1) successfully installed to: /usr/local/bin/composer Use it: php /usr/local/bin/composer
8. Installation de Node.js 12 et NPM 6
curl -sL https://deb.nodesource.com/setup_12.x | sudo bash -
sudo apt-get install -y nodejs
nodejs --version
v12.13.1
npm --version
6.12.1
9. Installation de Claroline
sudo mkdir /var/www/mylms/
mkdir: created directory ‘/var/www/mylms/’
sudo chown -v www-data:www-data /var/www/{,mylms}
changed ownership of ‘/var/www/’ from root:root to www-data:www-data
changed ownership of ‘/var/www/mylms’ from root:root to www-data:www-data
sudo -u www-data git clone https://github.com/claroline/Claroline /var/www/mylms/
Cloning into ‘/var/www/mylms’…
remote: Enumerating objects: 25, done.
remote: Counting objects: 100% (25/25), done.
remote: Compressing objects: 100% (24/24), done.
remote: Total 70146 (delta 15), reused 1 (delta 1), pack-reused 70121
Receiving objects: 100% (70146/70146), 13.94 MiB | 4.53 MiB/s, done.
Resolving deltas: 100% (39908/39908), done.
cd /var/www/mylms/
sudo -u www-data php scripts/configure.php
Please provide a value for the following parameters:
database_host (localhost):
database_name (claroline): mylmsdb
database_user (root): mylmsadmin
database_password: mylmsadminpw
secret (change_me): mysecret
Config file app/config/parameters.yml written
sudo -u www-data composer update --prefer-dist --no-dev
Rmq : Temps d’exécution : 4 min 4 s avec 4 GB de RAM
sudo -u www-data npm install
sudo -u www-data composer build
sudo -u www-data php app/console claroline:install
sudo -u www-data php app/console claroline:user:create -a
first name: John
last name: Doe
username: mylmsadmin
password: mylmsadminpw
email: admin@opensharing.priv
sudo systemctl restart mariadb sudo systemctl restart apache2
10. Première connexion par le Web
http://mylms.opensharing.priv
On accède au front-office :
On peut ensuite se connecter au site :
On accède ainsi à notre back-office :
On peut visualiser ses espaces d’activités :
On peut personnaliser notre site et ajouter nos ressources :